PureVue uses a sputtered ceramic layer to cut heat and glare on home and office windows while keeping the glass looking natural, with low reflection inside and out.
Key Benefits
- Sputtered ceramic technology
- Rejects up to 58% of the sun’s total energy
- Keeps the view out and the natural look of the glass from outside
- Well suited to coastal homes and buildings
- Helps protect furnishings and finishes from fading
- Available in four shades: 35, 50, 60 and 70
Specifications
| Film | PureVue 35 | PureVue 50 | PureVue 60 | PureVue 70 |
|---|---|---|---|---|
| Visible light transmittance % | 37% | 50% | 61% | 72% |
| Visible light reflectance (exterior) % | 16% | 13% | 11% | 8% |
| Visible light reflectance (interior) % | 15% | 11% | 9% | 8% |
| Solar heat gain coefficient | .42 | .52 | .60 | .61 |
| Total solar energy rejected % | 58% | 48% | 40% | 39% |
| UV damage weighted transmittance (Tdw-ISO, 300 to 700 nm) % | 25% | 33% | 40% | 51% |
| UV light blocked (300 to 380 nm) % | >99% | >99% | >99% | >99% |
| Fade reduction % | 70% | 60% | 51% | 38% |
Figures from Solar Gard, checked November 2026, for film on ¼-inch clear glass. Solar Gard gives them as estimates; results on your own windows can differ. Spec sheets and the warranty are under Documents below.
Documents
PureVue 35 spec sheet
(407.84 KB)
PureVue 50 spec sheet
(407.84 KB)
PureVue 60 spec sheet
(410.48 KB)
PureVue 70 spec sheet
(364.41 KB)
CSI 088713 Solar Control Films - PureVue
(29.24 KB)